Tsurumi LSP Electric Residue Pump
Tsurumi LSP Electric Residue Pump
From $1,110.00 excl. GST (Price per Item)
Overview
The Tsurumi LSP is a single-phase, high-performance electric residue pump designed for fast removal of standing water down to 3mm, via the supplied suction plate and hose. Compact, durable and easy to handle, it’s a reliable choice for contractors who need an efficient shallow-water solution for clean-up, pit drainage and emergency dewatering.
The LSP is commonly used across mining, construction and industrial environments. Since the pump incorporates a submersible motor it can be submerged in water. The flow-thru design provides maximum motor cooling efficiency allowing continuous operation at low water levels and extended dry-run capability. On initial start-up, may need priming due to hydraulic design.
| Discharge Bore(mm) | 25 x 25 |
| Motor Output(kW) | 0.48 |
Key Features & Benefits
- Auto cutout protector
- Removes standing water down to 3mm
- Lightweight and portable design
- Ideal for shallow-water and final clean-up tasks
- Rugged construction suitable for demanding sites
- Spare parts support available
- Manual control operation
- Siphon breaker prevents reverse-flow when the pump stops its operation
- Free-Positioning Suction Attachment
- The suction attachment can be placed freely without the need to move the pump
Typical Uses
This pump is suitable for a wide range of shallow-water and clean-up situations, including:
- Final clean-up after standard dewatering
- Draining shallow pits, tanks and basins
- Flood response and emergency water removal
- Commercial and residential clean-ups
- Tight-access areas where larger pumps won’t fit
Note:
1. Not all the pumps listed in the catalogue are available for Australia. Models for Australia are listed below under ‘Models’
2. Product guides / catalogues may vary for Australia. Contact us for the latest technical data
Model | Motor Output (kW) | Phase | Starting Method | Max Flow (l/sec) | Max Head | Dry Weight (exc. cable) | Suction x Discharge Bore (mm) |
|---|---|---|---|---|---|---|---|
LSP1.4S  | 0.48 | Single | Capacitor Run | 0.83 | 6.9m | 16.5kg | 25 x 25 |
Notes:
- Icon identifies single phase pumps in compliance with AS/NZS 4417.1 & 2
FAQs
What is a residue pump?
A pump designed to remove water down to very shallow levels for clean-up.
How low can the LSP pump water?
It can remove water down to floor level when used with the supplied attachment.
Is the LSP suitable for continuous operation?
Yes, it’s designed for demanding commercial use.
What warranty does the LSP include?
The unit includes Tsurumi’s standard warranty – refer to Terms and Conditions for full details.
Why Choose Tsurumi
Tsurumi pumps are known worldwide for their reliability, ease of maintenance and long service life. With more than a century of engineering experience, Tsurumi is trusted by contractors, councils and operators across Australia. Customers also benefit from national spare-parts support and fast delivery.
Related Products
Cables
Cables Tsurumi's 10m cable set are 220/230/240V - 50Hz. Every cabtyre cable features an anti-wicking block which prevents incursion of water into the motor. The automatic version comes with the float switch. Selection Guide: 801001010219 (Manual) Suits: LSP1.4S-52, LSC1.4S-52, LB-800-52,...
Hoses
Hoses Exitflex red layflat hoses are well suited for water drainage at sites where water must be moved to significantly higher or lower elevations. It is ideally suited for use as a high pressure water transfer hose in the mining,...
HS/HSZ
HS/HSZ Series The HS-series is a submersible single-phase portable drainage pump and the HSZ-series is automatic. The automatic operation, controlled by a single float switch, reduces consumption and extends operating life. Though the HS & HSZ are a single-phase unit,...
Max Flow Rate: 5L/sec (0.3m3/min)
Head Max: 18m
HSD
HSD Series The HSD pump is a submersible single-phase portable slurry pump. It is equipped with a high-chromium cast iron agitator that assists smooth suction of the settled matters. Though the pump is a single-phase unit, it has the durability...
Max Flow Rate: 3.6L/sec (0.22m3/min)
Head Max: 13m