
UT/UTZ Series – Submersible Sewage and Wastewater Pumps
UT/UTZ Series – Submersible Sewage and Wastewater Pumps
$660.00 – $1,137.00Price range: $660.00 through $1,137.00
Overview
The Tsurumi UT and UTZ series are submersible pumps for sewage, wastewater, and liquids containing solid matter. These are available in single and three-phase models. The semi-vortex impeller provides a 35mm solids passage, significantly reducing the risk of clogging when pumping raw sewage or wastewater that carries grit, or organic material.
The UT series is manually controlled. The UTZ series is fitted with a float switch that automatically starts and stops the pump, preventing dry running and reducing power consumption when the sump or pit empties.
The 2-pole motor keeps the unit compact and economical to run, and the auto-cutout protector shuts the pump down if the motor temperature exceeds safe limits during continuous or high-demand operation.
Key Features
35mm Solids Passage
The semi-vortex impeller gives the UT/UTZ a 35mm solids passage, which is significantly larger than most drainage pumps in this class. In sewage and wastewater service, where the liquid often carries fibrous material, grit, and solids, the wider passage means fewer blockages and less time spent clearing the pump.
Semi-Vortex Impeller
The semi-vortex design generates hydraulic flow that keeps solids moving through the pump without direct contact with the impeller. Combined with the low-height volute casing, the pump handles difficult liquids efficiently while keeping energy use in check.
UTZ Float Switch Auto-Control
The UTZ float switch starts the pump when water reaches the set level and stops it when the sump is empty. On wastewater applications that require unattended operation, the auto-control keeps the system running without manual intervention and prevents the pump from running dry.
Auto Cutout Protector
If motor temperature rises above safe operating levels, the pump shuts down automatically. The unit can be restarted once cooled, without any intervention beyond resetting the protector.
Typical Applications
- Transferring wastewater between tanks and holding systems
- Draining sewage and wastewater from residential, commercial, and industrial premises
- Pumping run-off water that contains suspended solids
- Council wastewater management
- Industrial process wastewater drainage
- Temporary sewage bypass during maintenance or emergency works
Note:
1. Not all the pumps listed in the catalogue are available for Australia. Models for Australia are listed below under ‘Models’
2. Product guides / catalogues may vary for Australia. Contact us for the latest technical data
| Model | Type | Discharge Bore (mm) | Motor Output (kW) | Phase | Starting Method | Solids Passage (mm) | Max Flow (l/sec) | Max Head | Dry Weight (exc cable) |
|---|---|---|---|---|---|---|---|---|---|
| 40UT2.25 | Manual | 40 | 0.25 | Three | D.O.L. | 35 | 3.83 | 6.5m | 13kg |
| 50UT2.4S | Manual | 50 | 0.4 | Single | Capacitor Run | 35 | 4.5 | 9m | 13.5kg |
| 50UT2.4 | Manual | 50 | 0.4 | Three | D.O.L. | 35 | 5 | 9m | 13kg |
| 50UT2.75S | Manual | 50 | 0.75 | Single | Capacitor Run | 35 | 7.33 | 12.5m | 16.5kg |
| 50UT2.75 | Manual | 50 | 0.75 | Three | D.O.L. | 35 | 7.33 | 12.5m | 15.5kg |
| 50UTZ2.4S | Auto (with float) | 50 | 0.4 | Single | Capacitor Run | 35 | 4.5 | 9m | 13.5kg |
| 50UTZ2.75S | Auto (with float) | 50 | 0.75 | Single | Capacitor Run | 35 | 7.33 | 12.5m | 16.5kg |
Notes:
Icon identifies single phase pumps in compliance with AS/NZS 4417.1 & 2
Why Choose Tsurumi
Tsurumi pumps are known worldwide for their reliability, ease of maintenance and long service life. With more than a century of engineering experience, Tsurumi is trusted by contractors, councils and operators across Australia. Customers also benefit from national spare-parts support and fast delivery.
Proven Tsurumi Reliability
Tsurumi pumps are used on job sites across Australia and around the world. The UT/UTZ series is supported by Tsurumi’s national spare parts network and is available with fast delivery.
Related Products

Hoses
Hoses Exitflex red layflat hoses are well suited for water drainage at sites where water must be moved to significantly higher or lower elevations. It is ideally suited for use as a high pressure water transfer hose in the mining,...

PN
PN Series The PN-series is made of special resin and stainless steel, it is corrosion-resistant and lightweight. It is a semi-vortex pump, which is constructed of a vortex impeller and low-height volute casing. The semi-vortex pump design with moderate solids...
Max Flow Rate: 15L/sec (0.9m3/min)
Head Max: 26.1m

PU
PU Series The PU-series is a submersible vortex pump designed for raw sewage, wastewater, and liquid carrying solid matters. It is made of resin and 304 stainless steel and excellent in corrosion-resistance. The vortex mechanism provides practically unchokable operation in...
Max Flow Rate: 15.8L/sec (0.95m3/min)
Head Max: 23.9m
TM
TM Series The TM-series is a submersible titanium portable pump designed for handling seawater. It is made of titanium and resin. Since titanium has a superb corrosion resistance against seawater, it is suitable for various applications where seawater is used....
Max Flow Rate: 15L/sec (0.9m3/min)
Head Max: 26.1m



