MG
Flow Rate: 5.3L/sec (0.32m3/min)
Head Max: 35m
MG Series
The MG-series is a submersible grinder pump designed for handling raw sewage and other effluent drainage applications, where the pump or the discharge piping is subject to clogging from oversize material. The grinding mechanism cuts incoming solids into smaller pieces, which enables the pump to transfer sewage via a smaller diameter pipe.
Note:
1. Not all the pumps listed in the catalogue are available for Australia. Models for Australia are listed below under ‘Models’
2. Product guides / catalogues may vary for Australia. Contact us for the latest technical data
Performance Curves
Model Selection
Performance Curves
Model Selection
| Discharge Bore (mm) | Model | Motor Output (kW) | Phase | Starting Method |
|---|---|---|---|---|
| 32 | 32MG21.0 | 1 | Three | D.O.L. |
| 32 | 32MG21.5 | 1.5 | Three | D.O.L. |
| 50 | 50MG22.2 | 2.2 | Three | D.O.L. |
| 50 | 50MG23.7 | 3.7 | Three | D.O.L. |