The Tsurumi LSC series is designed for applications requiring water removal to extremely low levels. Unlike conventional drainage pumps, the LSC pump can remove residual water down to approximately 1 mm, making it suitable for situations where minimal standing water is required.

These compact submersible pumps are commonly used in construction, maintenance, and emergency drainage applications where floors, pits, basements, or surfaces must be left almost completely dry.

The LSC series combines Tsurumi’s proven pump reliability with specialised low-level pumping capability, allowing operators to remove water efficiently from areas where standard pumps cannot operate effectively.

The pump also incorporates an automatic thermal cut-off protector that shuts the pump down if the motor temperature rises excessively. This provides additional protection in situations where the pump may not remain fully submerged during operation.

Key Features

Ultra Low-Level Pumping
The LSC pump is capable of removing water down to extremely low levels, 1mm, typically leaving only minimal residual water behind. This makes it particularly useful for flat surfaces such as construction floors, rooftops, car parks, and maintenance areas where complete drainage is required.

Compact and Portable Design
The lightweight and compact construction of the LSC pump allows it to be easily transported and installed in confined or temporary work environments. Its portable design makes it well suited to construction sites and maintenance applications where equipment may need to be frequently repositioned. The discharge is selectable between vertical and inclined, which prevents folding or bending of the discharge hose.

Efficient Water Removal
The pump design allows water to be drawn from very shallow depths, enabling operators to efficiently remove residual water without the need for manual cleaning or secondary pumping equipment.

Typical Applications
The LSC series is commonly used in applications where water needs to be removed from flat surfaces or shallow areas, including:

• Construction site floor drainage
• Rooftop water removal
• Basement and pit drainage
• Emergency flood water removal
• Maintenance and cleaning operations
• Removal of residual water from concrete surfaces

These pumps are particularly useful when conventional drainage pumps leave behind standing water that must be removed manually.

Designed for Residual Water Removal
Many standard drainage pumps require a minimum water depth to operate effectively. The LSC pump is designed specifically to overcome this limitation, allowing operators to remove water down to extremely shallow levels.

This capability reduces the need for manual water removal and improves efficiency in situations where complete drainage is required.

LSC vs LSP Low-Level Pumps
Tsurumi offers both the LSC and LSP series for low-level drainage applications.

While the LSC series is designed specifically for removing residual water down to extremely low levels, the LSP series is typically used for higher flow drainage applications where greater pumping capacity is required.

Selecting the appropriate model depends on the required flow rate, head conditions, and the level of residual water removal required.